Designing 3D-models

Fra Robin

Revisjon per 26. aug 2010 kl. 12:18 av Yngveha (Diskusjon | bidrag)
(diff) ← Eldre versjon | Nåværende versjon (diff) | Nyere versjon → (diff)
Gå til: navigasjon, søk

The intention for this page is to contain advice or pointers to advice on making 3D-models for printing.

General advice

  • STL -files should be designed using millimetres rather than inches.
  • Make sure you have ways to remove unwanted support or unused material.
    • The use of support and the presence of excess material vary between different printing technologies.
  • Tolerances should be set according to the printing technology.
    • 0.2mm is minimum tolerance for our FDM printer

Links

Personlige verktøy