HP Jet Fusion 540
From Robin
(7 intermediate revisions not shown) | |||
Line 1: | Line 1: | ||
- | The HP Jet Fusion is unique here due to the usage of | + | [[Image:HP-Jet-Fusion-front.jpg|frame|Printer from the front]] |
- | + | ||
- | This gives the advantage that support material is not needed as each layer is already supported by the | + | The HP Jet Fusion is unique here due to the usage of Jet Fusion technology rather than FDM. |
+ | Jet Fusion is an additive technique that uses a heating lamp to harden a powdered material. | ||
+ | This gives the advantage that support material is not needed as each layer is already supported by the unhardened powder. | ||
The Jet Fusion is great for creating large batches of the same model, printing complex geometry, and for creating robust parts. | The Jet Fusion is great for creating large batches of the same model, printing complex geometry, and for creating robust parts. | ||
Keep in mind that post-processing of the parts is necessary, which potentially can be quite time-consuming. | Keep in mind that post-processing of the parts is necessary, which potentially can be quite time-consuming. | ||
- | |||
== Preparing your model == | == Preparing your model == | ||
- | + | '''This printer should only be running after work hours due to high noise''' | |
# Open your 3D model with HP SmartStream 3D Build Manager | # Open your 3D model with HP SmartStream 3D Build Manager | ||
Line 16: | Line 17: | ||
# Press "Send to print" to submit your job to the printer | # Press "Send to print" to submit your job to the printer | ||
# Choose your print job at the printer | # Choose your print job at the printer | ||
+ | # Turn on the shop vac by the window | ||
Line 30: | Line 32: | ||
# Follow the on-screen guide for vacuuming and cleaning the printer | # Follow the on-screen guide for vacuuming and cleaning the printer | ||
# Head on over to the sandblaster to remove unsintered powder from the print | # Head on over to the sandblaster to remove unsintered powder from the print | ||
- | # Use the ESD-armband when sandblasting as | + | # Use the ESD-armband when sandblasting as it creates high amounts of static electricity that will shock you otherwise |
+ | |||
+ | |||
+ | Link to HP Product page: | ||
+ | [https://support.hp.com/us-en/product/hp-jet-fusion-500-3d-printer-series/21430573/model/21430574] |
Current revision as of 08:21, 17 August 2020
The HP Jet Fusion is unique here due to the usage of Jet Fusion technology rather than FDM. Jet Fusion is an additive technique that uses a heating lamp to harden a powdered material. This gives the advantage that support material is not needed as each layer is already supported by the unhardened powder.
The Jet Fusion is great for creating large batches of the same model, printing complex geometry, and for creating robust parts. Keep in mind that post-processing of the parts is necessary, which potentially can be quite time-consuming.
Preparing your model
This printer should only be running after work hours due to high noise
- Open your 3D model with HP SmartStream 3D Build Manager
- Create duplicates or add other desired parts
- Use auto-pack to spread the parts
- Make adjustments if necessary
- Press "Send to print" to submit your job to the printer
- Choose your print job at the printer
- Turn on the shop vac by the window
Tip on printing layout
Keep in mind that heat from sintered material rises, and to prevent warping or inconsistent prints make sure that heat is able to escape freely and not get trapped inside your model. In many cases, orienting the print so that the most material is sintered at the top can be a good idea.
Post-processing
Wearing a dust mask, gloves, and a lab coat is highly recommended during all steps of post-processing due to dust from unsintered material.
- Select material recovery on the display to add unused material back into the printer
- Remove your part(s)
- Follow the on-screen guide for vacuuming and cleaning the printer
- Head on over to the sandblaster to remove unsintered powder from the print
- Use the ESD-armband when sandblasting as it creates high amounts of static electricity that will shock you otherwise
Link to HP Product page:
[1]