FPGA tools
From Robin
(→MAC or other systems) |
(→FPGA tools on LISP (2428)) |
||
Line 4: | Line 4: | ||
Alternatively, you can find it by searching for apps using the ''super''-key (Windows key): | Alternatively, you can find it by searching for apps using the ''super''-key (Windows key): | ||
- | [[Image:Xilinx_suit.png]] | + | <div style="margin:0 auto;overflow:scroll;width:auto;max-width:100%"> |
+ | [[Image:Xilinx_suit.png|class=noresize]]</div> | ||
Revision as of 20:38, 30 August 2022
Contents |
FPGA tools on LISP (2428)
Vivado and Vitis is installed locally on the computers in LISP. To launch Vivado go to Applications->Education-> Vivado
Alternatively, you can find it by searching for apps using the super-key (Windows key):
Launch in terminal
Launching the applications is done by entering the following commands in the terminal:
Questa with GUI:
vsim
Vivado with GUI:
vivado
Vitis with GUI:
vitis
Vitis HLS with GUI
vitis_hls
Vlog (terminal only):
vlog
Vcom (terminal only):
vcom
Help:
<command> -h
FPGA tools via share on Linux
First time initialization
If you need to use Xilinx' software other places than the RHEL7 machines at LISP, utilize the following guide:
cd nano .bashrc
Append the following lines to the end of the .bashrc file:
# Questa 2019.4 if ! [ -x "$(command -v vsim)" ]; then export PATH=$PATH:/projects/nanus/eda/Mentor/2019_2020/Questa/questasim/bin fi # Vitis Unified 2020.2 64-bit version if ! [ -x "$(command -v vivado)" ]; then source /projects/robin/programs/Vivado/2020.2/settings64.sh export PATH=$PATH:/projects/robin/programs/Vivado/2020.2/bin fi # License file export LM_LICENSE_FILE=5370@lisens.ifi.uio.no # Modelsim library export MODELSIM=/projects/robin/CADlib/modelsimCADLIB.ini # Remove duplicants in the PATH variable PATH=$(printf "%s" "$PATH" | awk -v RS=':' '!a[$1]++ { if (NR > 1) printf RS; printf $1 }')
After you have added the latter and saved the .bashrc file, restart the terminal or 'source' the .bashrc file.
Other versions
If needed, you can also make use of older or newer versions of the Xilinx products. As of August 2020, we have 2016.4, 2018.3, 2019.1, 2019.2 and 2020.2 available.
Digilent Adept on Linux
Digilent Adept to program the Atlys board can be obtained from the Digilent website.
Note that some Xilinx scripts require GNU BASH. Ubuntu (and possibly others) come with DASH. Disable DASH by reconfiguring it:
sudo dpkg-reconfigure dash
Note that the tools available on Windows, such as Xilinx ISE/PlanAhead and Modelsim are not supported by drift on Linux.
To enable autocompletion and history in XMD:
rlwrap xmd
License server
Licenses can be checked out from lisens.ifi.uio.no:
export LM_LICENSE_FILE=5370@lisens.ifi.uio.no
On Windows:
setx LM_LICENSE_FILE 5370@lisens.ifi.uio.no
Academic Xilinx FPGA tools
Python interface to Xilinx/EDK MHS: https://github.com/EPiCS/reconos/tree/master/tools
Bitstream Intepretation Library (Virtex5): https://github.com/florianbenz/bil
DeBit: http://code.google.com/p/debit/
TORC: http://torc-isi.sourceforge.net/
ReconOS: http://www.reconos.de
Having problems?
If you are having problems running the tools as mentioned, please ask a group teacher or send an mail to: robin-engineer at ifi.uio.no.
"command not found" => Not running .bashrc?
When running ssh from another linux system or Mac, it is possible that only .bash_profile is read, not .bashrc. This will typically lead to "command not found" when trying to launch vsim or any other program that should have been found in the path. This can be further confirmed by listing PATH or the MODELSIM variable
>>echo $PATH >>echo $MODELSIM
If they don't show traces of what you have put into .bashrc, it has not been run, or the variables have over-written later.
To ensure that the .bashrc is run when opening a new xterm or ssh'ing into a new server, append the following to your .bash_profile:
if [ -f ~/.bashrc ]; then source ~/.bashrc fi
You can also manually source .bashrc and then open a new xterm that can use vsim
>>source ~/.bashrc >>xterm &
This last solution will of course be a one-time only approach, since it doesn't change any configuration file.
Here is an article on how it became two configuration files rather than just one: www.joshstaiger.org/archives/2005/07/bash_profile_vs.html
Remote access with GUI
X11 forwarding is required to be able to see windows opened on a linux server. On windows, X-win32 can be used. For linux ssh -X or ssh -Y can be used, while on MAC you may need XQuartz or something similar to allow X11 forwarding. More on this can be found here.