Ultimaker

From Robin

Revision as of 08:13, 16 April 2018 by Vegardds (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

Getting started with 3D printing on the Ultimakers

3D printing with the Ultimaker is fast, cheap, and a fun experience based on FDM technology. However, it is easy to make mistakes due to hardware or software setup. The following article is supposed to give you as a user, the necessary background for getting started with rapid prototyping and 3D printng with the Ultimakers.

The workflow in any prototyping using 3D printers is:

  1. Retrieving/creating a 3D model: You can fetch files from creator spaces such as Thingiverse or model them your self, using a CAD tool such as Fusion360 or SolidWorks.
  2. Generate paths for the 3D printer: The tool for generating paths in The Ultimaker has their own slicer namely Cura.
  3. Setting up the hardware: Make sure that the build plate is clean, the machine is calibrated, and when you start your print please make sure the first layer turns out as expected.

Cura

The official guideline from the manufacturer can be found here. Note that we have our own additional guidelines to increase the life expectancy of the printers.

Setup

Please use the following setup:

Quality: Normal (0.15) Innfill: Density (<=20%) Material: Printing temp (210), Build plate (60). Diameter (2.85), Flow (100), Enable retraction(true) Speed: Print speed(50), Travel speed(120), Print acc.(3000), Travel acc.(4000) Build plate adhesion: Brim(true)

Version

As a rule of thumb, we recommend using the latest version of Cura.

Filament

From 2017, we have only bought filament from Ultimaker which is due to quality. The main printing material we use in the labs is PLA with 2.85 mm dimension. Additionaly, our Ultimaker 3s can print in PVA. The material needs to be set up correctly in the printers UI.

Dual Extrusion

Setting up the hardware

The standart nozzle size is .4 mm. If the nizzle

Before pressing start

When print is finished

Our Ultimakers

We have got six Ultimakers in total in our labs.

The Ultimakers of Robin
Generation Number of printers Location
Ultimaker 3 Extended 2 4112
Ultimaker 3 1 Sonen
Ultimaker 2 2 Sonen
Ultimaker 2 Go 1 Mats
Personal tools
Front page