FunkySoleMusic

From Robin

(Difference between revisions)
Jump to: navigation, search
(Ny side: == Funky Sole Music == The software for running the Funky Sole Music demo is set up on the iMac in the Eastern corner of the mocap lab (the corner closest to Yngve's office). This software…)
Line 11: Line 11:
* Wireless router, preferably connected to the iMac through ethernet.
* Wireless router, preferably connected to the iMac through ethernet.
-
=== Setting up ===
+
=== Setting up the GPSP ===
* The wireless router must be set up with SSID EPiCSdemo
* The wireless router must be set up with SSID EPiCSdemo
Line 20: Line 20:
* Select the appropriate GPSP in the top left drop down menu.
* Select the appropriate GPSP in the top left drop down menu.
* Press "Start", and you should see the sensor data being plotted on the screen
* Press "Start", and you should see the sensor data being plotted on the screen
 +
* You might want to leave the setup patch open while running the demo, to be able to stop streaming without turning off the GPSP.

Revision as of 06:20, 4 May 2015

Funky Sole Music

The software for running the Funky Sole Music demo is set up on the iMac in the Eastern corner of the mocap lab (the corner closest to Yngve's office). This software is:

  • Netbeans
  • Max
  • Reason

Hardware needed:

  • [GPSP]
  • Sensor sole with three FSRs
  • Wireless router, preferably connected to the iMac through ethernet.

Setting up the GPSP

  • The wireless router must be set up with SSID EPiCSdemo
  • Open the shortcut "GPSP patch", which leads to the Max GPSP setup patch. Then, wait until the indicator on the screen says "1 GPSP found".
  • Repoll local IP adresses, then choose the local IP given by the router (not localhost) in the drop down menu. Typically an IP starting with 192, or 10.
  • Wait a couple of seconds until the screen says "ready", then choose to "Set send IP on all GPSPs" in the drop down menu on the left side. Replies from the GPSP should appear in the Max window (CMD + M) to open the Max window.
  • Press "Repoll GPSP list"
  • Select the appropriate GPSP in the top left drop down menu.
  • Press "Start", and you should see the sensor data being plotted on the screen
  • You might want to leave the setup patch open while running the demo, to be able to stop streaming without turning off the GPSP.
Personal tools
Front page